Ads

Collapse

Announcement

Collapse
No announcement yet.

Digi image/ Promarker problems!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Digi image/ Promarker problems!

    Hi
    Having problems colouring digi images with Promarkers. The printer ink keeps bleeding! Have tried hairspray but didn't help. Any suggestions woiuld be much appreciated. Carolxx

  • #2
    As fra as I am aware hairspray will not help with this...cheap hairspray can help to set chalks though.

    Wherever possible print your images at least 24 hours before you plan to colour them. If you cannot do that because of time limits try setting the ink using a heat gun on low setting. You can also try printing them out in draft quality rather than premium quality and print onto good quality smooth coated cardstock.

    If you are still having problems you may need to adjust your colouring technique staying close to but not up to the lines, allowing the ink to fill the space to the line...takes practice but can be done. That is a last resort though and does not help with blending/shading though.

    Good luck...

    Comment


    • #3
      Are you using decent card? i've never had this problem, i use smooth premium card.
      Mandy x

      Comment


      • #4
        Thanks girls for the advice, will give it a go. Carolxx

        Comment

        Working...
        X