Ads

Collapse

Announcement

Collapse
No announcement yet.

dull fimo beads

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • dull fimo beads

    Hi,
    I'm making necklaces with beads made from fimo but the result is rather dull - can anyone suggest a varnish that will really work on fimo beads - I've used sculpey gloss glaze but the beads simply don't shine.
    I'd be grateful for any advice - Deborah

  • #2
    Sorry you have had no reply to this. I use the Fimo Gloss Varnish, makes them very shiny.
    www.beadlab.com

    Comment


    • #3
      Hi, I use Klear floor polish, available from all major supermarkets. Sometimes I give the beads more than one coat to get a good finish - hope this helps
      http://www.westofscotlandcraftfairs.com

      Comment


      • #4
        thanks

        Thanks so much to both of you - I'll give them a go.
        Deborah xx

        Comment


        • #5
          Hi there,
          I use fimo gloss varnish too, and it does just fine!
          If you 're not totally happy with the gloss of your beads,have you tried mixing a dash of pearl power to the clay?You can have very nice effects,after a few tries..kind of iridescence.
          Let us know!
          x
          ari
          xx ary
          www.petitechacal.com
          http://somuchlife-petitechacal.blogspot.com/
          www.petitechacal.etsy.com

          Comment


          • #6
            hi
            gloss varnish is good i keep a bit of old clay at hand and i stick cocktal stick in
            then start varnishing it help me so i dont get finger prints on the beads

            Also you can use a nail buffer when i was tranning to be a nail tec at collage i had a nail buffer i thought i would try this on the filmo beads as funny as it seems it works well they come up real shiny and look like a real stone it save you buying varnish all the time too and i think this method is a better result try it and decide for yourself
            Love Chaze2k7 xx

            Comment


            • #7
              Let it shine!

              I usually use the Fimo varnish but have recently used clear nail varnish which is just as good and dries quicker! (It's cheaper too!)
              www.doodlesartandcraft.co.uk

              Find us on Facebook
              http://www.facebook.com/home.php#!/p...y/173605348873

              Crafters DON'T do housework!

              Comment


              • #8
                Clear nail varnish might be ok for a short while but it will yellow with age.

                I usually leave mine unvarnished or use a mat varnish as I don't like my beads too shiny

                LC's Beads
                http://www.freewebs.com/lcsbeads
                http://www.lcsbeads.folksy.com
                http://www.lcsbeads.misi.co.uk
                http://www.facebook.com/home.php?#!/...?v=wall&ref=ts

                Comment


                • #9
                  Yikes!

                  Just as well I don't do Fimo to sell to anyone else then! I've smothered half a dozen pendants that I made for myself with clear nail varnish! It's looking OK so far!
                  www.doodlesartandcraft.co.uk

                  Find us on Facebook
                  http://www.facebook.com/home.php#!/p...y/173605348873

                  Crafters DON'T do housework!

                  Comment


                  • #10
                    I think LC beads is right..When I started Fimo I read a few posts in which they advise you not to use nail varnish, as it may become yellish or even crack...It's true that the gloss from Fimo or others it's slightly more expensive (but not even that much, if you buy a decent nail varnish)
                    but it lasts a while..
                    xx ary
                    www.petitechacal.com
                    http://somuchlife-petitechacal.blogspot.com/
                    www.petitechacal.etsy.com

                    Comment

                    Working...
                    X