View Full Version : 3D letters wanted
23-03-2009, 07:54 PM
I am looking for large 3D letters in either wood or cardboard to decorate - I cannot find them anywhere any suggestions?
23-03-2009, 08:55 PM
I have seen these MDF letters to decorate;
Hope that helps?
23-03-2009, 09:01 PM
Thanks for the link - I have managed to source these ones - but it's ones that look like actual boxes so that they can stand up as opposed to leaning against something.
23-03-2009, 10:08 PM
Hi How big do you want the letters to be, and how deep. For instance, in wood, if you simply want them to stand on edge, then a depth of 12 to 18 mm should suffice, but if you want a more sturdy type, then you would have to use a thicker piece of wood.
if you post this information, it may help you to get the replies you are after. The more information the better.
I ask the question, as I recently made a large house number for a customer. Although this particular item was to be fixed to a wall, it did stand upright on its own, so presumably letters would do the same.
23-03-2009, 10:57 PM
we've just had quite big mache letters come in to our hobbycraft shop
24-03-2009, 12:35 AM
I am looking for quite a sturdy size - probably about 2-3cm depth - I have seen these online but were £4 each - which is way to expensive and I think it would be too expensive if they were made in wood - I love the sound of the paper maiche ones.
30-03-2009, 05:23 PM
If your still stuck I cut mdf letters from as little as 50mm to 700m high and from 4mm to 18mm thick. If you want thicker just glue them together. Have a look in my gallery for some samples.
09-04-2009, 09:37 PM
If you want them to stand up, you could always use thin wood/mdf, but glue thick blocks onto them at the back? In fact, half-blocks can be better still - right-angled triangles, y'know?
20-10-2010, 05:46 PM
We make 3D letters for Shop Front Signs and also supply them for the general public. I have put up a blog post on how you could make your own. I shall put some videos up and some images for you to view to get some ideas.
www dot arro-signs dot co dot uk/blog/how-to-make-3d-letters-for-the-home/
23-10-2011, 07:37 PM
24310In hobby craft they have paper mache 8" high free standing letters. £2 each :) These are some iv made 24309
29-10-2011, 10:31 PM
we do some if it helps in mdf
check our facebook
30-10-2011, 02:42 PM
Decopatch have a range of 3D Paper Mache letters in 10.5cm, 20.5cm and 50cm heights. They are free-standing. Perhaps these would work?
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.